Steel hull offshore Van De Stadt 34ft bilge keels and dog house, I am a boilermaker by trade and this was my loving project for 4 years (I planned to do a circumnavigation around the world with my partner), but don&#39;t have the time to finish it. I build it to last, using the welding procedure of Wynand Nortje. The hull is fully welded, lead in the keels only inside fitting and a little bit of welding to be done. For 8000$ you have only the bare hull, for 2000$ more sell the paint needed for the paint system ( Transozink primer, transpoxy inside underwater, transoxane outside) paid about $5500 last June. If you are interested I have quantity of part for this boat: -Motor Volvo penta D1-30 with sail-drive brand new (paid $12000) -Bow thruster LEWMAR 185TT3.0KW 4HP new (paid $1500) -Acrylic tinted windows 10mm new(custom cut to suit the boat) -Self Steering Wind Vane Flemming -2 Hatch lewmar new -Heavy duty Stainless Steel Hinged mast foot -All stainless steel handrail made -2 winch Barbarosa 2 speed 51.2 -1 winch Anderson 2 speed 46ST -1 winch Barient 2 speed 22-33 -5 zinc anode heavy duty new -GPS Point-1Baja NMEA2000 New -Triducer Multisensor Airmar DST-800PSF new (depth speed temp) NMEA2000 -Windlass Lewmar Pro Series 1000 -Anchor Spade S80 -3 Sunvent solar powered deck ventilator new -2 air-only deck ventilator new -Gimbal Stove with oven (stainless Steel) -Stainless steel bearing for rudder -Stainless Steel pieces to finish the boat. - Set of plans to build a Van de Stadt 34ft with registration plate(from the designer) Plus the plans of the modifications I have done ( solidworks CAD plans) -A few more bits and pieces I can sell you the lot with the boat and the paint for $20000 negotiable.

Steel

Mono

Western Australia

HOME BUILD VAN DE STADT 34" TAB-ID 5690